Table of Contents
Advertisement
To activate or deactivate the alarm:
Press ALARM when in the alarm display.
when the alarm is set.
To silence the alarm and reset it for the next day:
Press ALARM.
TEMPERATURE
To toggle the temperature unit:
Press °C / °F.
To view outdoor sensor temperature readings:
Press CHANNEL.
•
shows which remote sensor's data you are
viewing.
•
is permanently displayed in the indoor
temperature area.
To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds. Each
sensor's data is displayed for 3 seconds.
To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear all records:
RMR382_EU_M_EN_R2.indd 7
Press and hold MEM for 2 seconds.
appears
TEMPERATURE TREND
Recent indoor / outdoor temperature trends are shown
by the trend icon.
RISING
ICE WARNING
If the channel 1 sensor falls between 3°C to -2°C (37°F
to 28°F),
flashes to warn you that the temperature is
approaching freezing.
NOTE
The warning will automatically stop if the
temperature goes outside the ice-warning range.
HI / LO TEMPERATURE ALARM
An alarm can be set to sound if the sensor set to
channel 1 records above or below a temperature of
your choice.
To set alarm ON / OFF :
1. Press and hold TEMP HI / LO
2. Use
and
alarm. Press TEMP HI / LO
3. Press
TEMP HI / LO
4. If alarm has been activated, use
the temperature.
5. Press TEMP HI / LO
7
STEADY
FALLING
.
to select high / low temperature
to confirm.
or
to set alarm ON / OFF and press
to confirm.
or
to confirm.
5/12/06 7:10:57 PM
to select
Hide quick links:
Advertisement
Table of Contents
