Roland VS-1680 User Manual page 133

Destination Mark
Select the first marker of the copy destination.
The markers that had originally been assigned to the copy
destination will remain, but the data will be rewritten. Also,
the markers from the copy source will be added.
fig.4-10.e
Copy area Destination Marker
1 2 3 4 5
Destination Marker
1 2 3 4 5
6, 10: The Automix data of the copy-destination
markers will be rewritten.
7, 9, 11: Since copy-source markers corresponding to
the copy-destination markers do not exist, the Automix
data will be erased.
8, 12: Markers with Automix data will be created.
11. To copy the data, press [F4 (Exec)]. If you press
[F6 (EXIT)], you will return to Step 7 without copying the
data.
12. A message will ask for confirmation. Press [YES]. If you
press [NO], the data copy operation will be halted, and
you will return to Step 11.
fig.4-11
13. When the data has been copied, the display will indicate
"Complete." Press [PLAY (DISPLAY)].
6 7 8 9 10 11
6 7 8 9 10 11 12 13
Smooth Data Transitions
This operation creates Automix data that smoothly connects
the first Automix marker in the specified area with the last
marker.
fig.4-12.e
Gradation area
0 M1 M7
Time
Editing of the Automix data cannot be cancelled by the Undo
function.
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F6 (UTIL)].
3. Press [PAGE] so that [F5] indicates "A.Mix," and then
press [F5 (A.Mix)].
fig.4-02
4. Press [F2 (Micro)].
5. Press [PAGE] so that [F1] indicates "In."
fig.4-03
6. Make sure that the cursor is located at "Edit Target," and
use the TIME/VALUE dial to select the type of Automix
Chapter 9 Automix
Gradation area
0 M1 M7
Time
133