Displaying The 3D Landmarks; Setting The Detailed City Map; Setting The Barrier Graphic For The City Map - Pioneer AVIC-Z150BH Operation Manual

Chapter
27 Customizing preferences
! On
Locks the normal view when you scroll the
screen.

Displaying the 3D landmarks

p The 3D landmarks and this setting are only
available on AVIC-Z150BH.
You can select whether to display the 3D land-
marks on the map.
p 3D landmarks only appear when the view
mode is 3D View and the map scale is
set to 0.25 mile (200 m) or lower.
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [3D Land Mark].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Displays the 3D landmark on the map.
! Off:
Hides the 3D landmark on the map.

Setting the detailed city map

p This function is only available on AVIC-
Z150BH.
You can select whether to display the city map
when in certain metropolitan city areas.
p The city map is displayed when the map
scale is 0.05 mile (50 meters) or less.
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [City Map].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Automatically switches to the city map
when in a city map area.
138
En
! Off:
Does not show the city map.
p Even if you switch City Map to On ,
the city map cannot be displayed in
areas where there is no city map data.
Setting the barrier graphic for
the city map
p This function is only available on AVIC-
Z150BH.
On the city map screen, you can display a
barrier graphic pattern where no city map
data is available. This prevents a normal map
of a different scale from being displayed at the
same time, considerably enhancing the clarity
of the city map on screen.
Barrier graphic
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [City Map Barrier].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Displays the barrier graphic for the city
map.
When the vehicle position or cursor enters
the barrier graphic area, the graphic disap-
pears and a normal map is displayed in full
screen mode.
! Off: