How To Use The Map; How To Read The Map Screen - Pioneer AVIC-Z150BH Operation Manual

How to use the map

Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.

How to read the map screen

This example shows an example of a 2D map screen.
1
2
3
4
p Information with an asterisk (*) appears
only when the route is set.
p Depending on the conditions and settings,
some items may not be displayed.
1 Current time
2 Scale display touch panel key
Touching [+] or [ ] changes the map scale.
You can change the map scale between 10
yards and 1 000 miles (10 meters and 2 000
kilometers).
p The _ mark shown below indicates the
scale distance (2D display only).
3 Map control
The View screen that can set the view mode
and the map orientation appears.
= For details of the operation, refer to
Switching the view mode on page 33.
= For details, refer to Switching the map or-
ientation on page 33.
4 Current position
e d
5
5 Information bar
c
Indicates the current location of your vehicle.
The apex of the triangular mark indicates your
orientation and the display moves automati-
cally as you drive.
p The apex of the triangular mark is the
actual current position of the vehicle.
Each touch of this key changes the display in-
formation as follows.
! The information of where your vehicle is
traveling along
p When Street Name is selected on
Current Location Info. of Navi
Settings , the street name or city
name is displayed. Also, Coordi-
nates is selected, latitude and longi-
tude are displayed.
= For details, refer to Setting the cur-
rent street name display on page
140.
Chapter
03
b
a
9
8
7
6
29
En