Adjusting Source Levels; Using The High Pass Filter - Pioneer AVIC-Z150BH Operation Manual

Customizing preferences
5 Touch the frequency for which you
want to adjust the level.
6 Touch [a] or [b] to adjust the level of
the equalizer band.
Each time you touch [a] or [b], the level of
the equalizer band increases or decreases.
Using the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit
the vehicle s acoustics. To use this function,
the vehicle s acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on page 154.
p To manually adjust the equalizer curve, set
Auto EQ to Off .
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [EQ Menu].
Touch the key next to "Auto EQ" to
3
turn the auto-adjusted equalizer on or off.
4 Select the equalizer curve.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Display the "AV Sound Settings"
2
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
3 Touch [SLA].
4 Touch [+] or [–] to adjust the source vo-
lume.
+8dB to –8dB is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! AV1 and AV2
! CD, ROM, and DivX
! SD and USB
! Bluetooth Audio, Pandora (Bluetooth con-
nection) and Aha Radio (Bluetooth con-
nection)
! Pandora (HDMI connection) and Aha
Radio (HDMI connection) (for AVIC-
Z150BH and AVIC-X950BH)
! iPod, Pandora (iPhone) and Aha Radio
(iPhone)

Using the high pass filter

When you cut lower sounds from the subwoo-
fer output frequency, activate HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [HPF].
3 Touch [On].
# If you touch [Off], the setting is turned off.
Chapter
27
153
En