Technical D Ata - Husqvarna 324R X-Series Operator's Manual

Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to ANSI
2
B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
TECHNICAL DATA
3
324Rx
1,53/25,0
1,38/35
1,03/26
3100
11000
8300
0,8 / 7000
No
No
Ikeda
NGK CMR5H
0,024/0,6
Walbro
1,06/0,5
12,1/5,5
89/97
1,3/1,3
1,7/1,6
3,1/2,6
5,2/4,1
English – 31