Transportation And Storage; Technical Data - Husqvarna 128CD Operator's Manual

Hide thumbs Also See for 128CD:
Table of Contents

Advertisement

Available languages

Available languages

2. If, the engine is not easy to start or operate,
examine the spark plug for unwanted materials.
To decrease the risk of unwanted material on the
spark plug electrodes:
a) make sure that the idle speed is correctly
adjusted.
b) make sure that the fuel mixture is correct.
c) make sure that the air filter is clean.
3. Clean the spark plug if it is dirty. Examine that
the electrode gap is correct. (Fig. 39)
4. Replace the spark plug when it is necessary.
To apply grease to the two-piece
shaft
Apply grease to the end of the drive shaft after
each 30 hours of operation. (Fig. 40)

Transportation and storage

WARNING:
fire, make sure that there are no leaks or
fumes during transportation or storage.
Make sure that there is no risk of sparks
or fire.
Empty the fuel tank before transportation or long-
term storage. Push the air purge bulb to make
sure that all fuel is removed. Discard the fuel at
an applicable disposal location.
Engine Specifications
Cylinder displacement, cm
Electrode gap, mm
3
Fuel tank volume, cm
-1
Idling speed, min
Maximum power speed, min
Power output, kW
Spark plug
Maximum output shaft rotation, min
Emissions durability period, h
Product Dimensions
14
Transportation and storage
To prevent the risk of

Technical data

3
-1
-1
To do the maintenance to the air
filter
To clean the air filter
1. Remove the air filter cover and remove the air
filter. (Fig. 41)
2. Clean the air filter with warm soap water. Make
sure that the air filter is dry before you install it.
3. Replace the air filter if it is too dirty to fully clean
it. Always replace a damaged air filter.
To add grease to the bevel gear
Make sure that the bevel gear is filled ¾ full with
bevel gear grease. (Fig. 42)
Make sure that the product is clean and that a full
servicing is done before long-term storage.
Remove the spark plug and put approximately
15 ml of two-stroke oil into the cylinder. Turn the
product 3 times and install the spark plug again.
Attach the product safely to the vehicle during
transportation.
Keep the product in a dry, cool and clean space
with good airflow. Keep the product away from
children.
128CD
LT28CCHV
28
0.6
400
2300-3200
8000
0.7
Champion QCJ-8Y
8000
125
128LD
LT28CSHV
28
0.6
400
2300-3200
8000
0.7
Champion QCJ-8Y
8000
125
215 - 005 - 04.09.2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

128ld

Table of Contents