Setting Up For Hands-Free Phoning; Using Voice Recognition; Connection Menu Operation - Pioneer DEH-X8500DAB Operating Manual

Using this unit

Setting up for hands-free phoning

Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1 Connection
Use the Bluetooth telephone connection menu.
Refer to Connection menu operation on this page.
2 Function settings
Use the Bluetooth telephone function menu.
Refer to Phone menu operation on the next page.
Basic operations
Making a phone call
! Refer to Phone menu operation on the next page.
Answering an incoming call
1 When a call is received, press
Ending a call
1 Press
.
Rejecting an incoming call
1 When a call is received, press and hold
Answering a call waiting
1 When a call is received, press
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press and hold
.
Adjusting the other party's listening volume
1 Turn LEVER while talking on the phone.
! When private mode is on, this function is not
available.
Turning private mode on or off
1 Press BAND/
while talking on the phone.
Switching the information display
1 Press
/DISP while talking on the phone.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).

Using voice recognition

This feature can be used on an iPod equipped
with voice recognition that is connected by
Bluetooth with the source set to iPod or
BT Audio.
% Press and hold M.C. to switch to voice
recognition mode.
Notes
! For details on voice recognition features,
check the manual for the iPod you are using.
! Some commands may not be available on this
unit.

Connection menu operation

.
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
! Connected devices may not work properly if
.
more than one Bluetooth device is connected
at a time (e.g. a phone and a separate audio
.
player are connected simultaneously).
1
nection menu.
# You cannot perform this step during a call.
2
Once selected, the following functions can be
adjusted.
Device list (connecting or disconnecting a device
from the device list)
! When no device is selected in the device list, this
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
3 Press M.C. to connect/disconnect the selected de-
Important
Press and hold to display the con-
Turn M.C. to select the function.
function is not available.
to connect/disconnect.
! Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
vice.
Once the connection is established, Connected
is displayed.
Section
02
19
En