Table of Contents
Advertisement
Setting the heat setting
1. Switch on the appliance with the On/Off button.
2. When getting up to heat/searing food, select a
high heat setting.
3. To end the cooking process, turn back to the Off
position.
The respective ring switch and the correspond-
ing pilot light are lit while the ring is operating.
Cooking with the automatic warm up function
When cooking with the automatic warm up function, the cooking zone works with full
power for a certain amount of time and then switches back to the heat setting set to
continue cooking.
1. To switch on the automatic warm up period, turn the ring switch clockwise as far as it
will go.
2. Then turn the ring switch back to the desired heat setting for the continuing cooking
period.
3. To end the cooking process, turn back to the "O" position.
If you select a higher heat setting during the warming up time, e. g. turning from "3" up
to "6", the time that has already elapsed for the warming up period is taken into consid-
eration. If you select a lower heat setting, the warm up period will end immediately.
You can end the automatic warm up function early by turning the ring switch back to
the Off position and then setting the required heat setting for the continuing cooking
period again.
Using the Rings
9
Advertisement
Table of Contents
