Table of Contents
Advertisement
The display changes to the current core tem-
perature.
If the current core temperature has already
been displayed, before the desired core temper-
ature is set, then press the Selection button re-
peatedly, until the function Meatprobe flashes
and then carry out the setting.
The core temperature is displayed from 30°C.
5. Select oven function and oven temperature.
As soon as the core temperature set is reached,
a signal sounds and the oven switches itself off
automatically.
6. Press any key to switch off the signal.
Within a few minutes a provisional end time is calculated, at which the core tempera-
ture set will be reached. This time is constantly recalculated and updated in the display.
For the system to work it is essential that the meat probe is in the meat and in the sock-
et at the start of the cooking process and that it is not removed during the cooking
process.
The time display and core temperature displays a "flashing rectangle" during the calcula-
tion phase.
Calculation of End Time.
17
Using the Oven
Advertisement
Table of Contents
