Contrast Adjustment - Geemarc Solar 4 CID User Manual

SETTING UP
4 - AREA AND LONG DISTANCE CODE SETTING
(Only under "ENGLISH 1" language)
In order to use your call records to dial, the telephone need to
distinguish between local and long distance calls. You need to
program your area code.
In the state of OFF-HOOK, do as the following steps:
- Press and hold
- Press button. LCD will displays "SET AREA CODE". The unit
enters the area code & LDS code.
- Press or
- Press OK button to set the next digit.
- When the area code setting has been completed, press OK button,
LCD diplays "SET LDS CODE". The unit enters long distance code
setting.
- Press or
- Press OK button to set the next digit.
- Press button to exit the setting.
Note : If you don't need to set area code, just set it as "- - - -" by
pressing OK button. Press
CODE" to ignore the long distance code setting.

5 - CONTRAST ADJUSTMENT

In the state of OFF-HOOK, do as following steps:
- Press and hold OK button then
- Press or
- Press OK button to comfirm and exit.
button.
button to select the correct number.
button to select the correct number.
button after entering "SET LDS
button to adjust the contrast.
.
6
SOLAR4 CID