Geemarc CL330 User Manual page 19

Geemarc multifunction telephone user guide

Hide thumbs Also See for CL330:

Table of Contents

Available languages

USING THE TELEPHONE

Making a Call – Hands Free

Dial the number on the keypad in the on-hook position

Use

if necessary to cancel and correct a wrong digit

Press

and the number will be dialled automatically. The

handsfree function (speaker) is now activated and the LED

indicator next to the button will be illuminated.

When the third party answers the call, you may speak with the

telephone in the hands free mode ( handset in the cradle).

Speak towards the microphone located on the front edge of the

Note: To deactivate the Hands Free function during a call, lift the

handset. To activate the Hands Free function during the call, press

and replace the handset on the cradle at the same time.

Also, when in hands free mode, only one person may talk at a time.

The switch-over between speaker and microphone is automatic.

This is dependent on the sound level of the incoming call and the

microphone respectively. It is therefore essential that there are no

loud noises, e.g. music, in the immediate vicinity of the telephone, as

this will disrupt the hands free function.

telephone.

To end the call, press

Table of Contents

Chapters

Table of Contents