THOMSON 905 User Manual page 42

6. Using Your Gateway With Multiple Handsets
a. Registering/Re-Registering a Handset
You can have up to 5 handsets registered to your Advanced Cable Gateway system base. Refer to
thomson-store.com
On the handset:
• Select "Menu" by pressing the softkey.
• Select the settings icon and confirm.
• Select "Registration" and confirm.
• Select "Register Handset" and confirm.
• Select the base to be associated with this handset (1 to 4) and confirm.
• Enter the system PIN (0000 by default) and confirm.
• Wait 1 to 2 minutes for the confirmation screen.
On the base:
• Switch the base into registration mode:
• Locate the "Page" button on the back of the Gateway
• Press and hold the "Page" button for more than 12 seconds
• Watch for the "LINK" LED on the front of the Gateway to begin blinking (registration mode)
• Release the page button when the "LINK" LED starts blinking.
On the handset:
• Wait 1 to 2 minutes for the confirmation screen.
• Your Handset is now registered.
Note:
If you already have 5 handsets registered and you want to swap one of them, you must remove that handset
from your list of registered phones (De-Register it) before installing the replacement handset.
b. Selecting a Base
Each Handset may be registered to 4 different Gateway bases.
If you register your handset with a non-Thomson Advanced Cable Gateway base, you will not be able to
access the data functions.
To change base:
• Select "Menu" by pressing the softkey.
• Select the settings icon and confirm.
• Select "Registration" and confirm.
• Select "Select Base" and confirm.
• Select the number of the base using the up and down (navigation) keys (1 to 4) and confirm.
• The bases to which the handset is registered are identified by the "Green Ball" located to the left of the Base number.
c. De-Registering a Handset
Handsets can only be de-registered from another Handset.
• Select "Menu" by pressing the softkey.
• Select the settings icon and confirm.
• Select "Registration" and confirm.
• Select "De-Register" and confirm.
• Enter the secret system PIN (0000 by default) and confirm.
• Using the up and down (navigation) keys, select the Handset to be de-registered and confirm.
d. Making/Taking an Intercom Calls
Making an intercom call
• On the keypad, select the number of the internal Handset you want to call (1 to 5) then press the (green) talk key or
the "intercom" softkey.
Taking an intercom call
When you receive an internal call, the screen displays the number of the calling Handset.
• Press (green) talk key or the answer softkey to answer the call.
To hang up at the end of the call, press the (red) OFF key or place handset in charger.
3660181C
to see how additional Handsets may be purchased.
Appendix - Customizing Your Handset
www.
36