11B/G Basic - THOMSON 905 User Manual

1.

802.11b/g Basic

To set the basic configuration for the wireless features, click Basic from the Wireless menu.
Note:
These must match the settings you make on your wireless-equipped PC on the LAN side.
The SSID is your Network Name.
• Change the default to a name of your choice up to 32 characters long.
• The wireless radio in your Gateway can be completely de-activated by changing Interface to Disabled).
• Click the Apply button to save your settings.
The Gateway Wi-Fi radio frequently transmits a beacon signal which can contain this network name (SSID).
The network Type is Open, so your SSID is included in that beacon and is therefore detectable by any nearby wireless
equipped PCs in the area.
Setting
Interface
Wireless Mac Address
Network Name (SSID)
New Channel
Data Encryption Mode
3660181C
Gateway
Wireless
802.11b/g Basic : This page allows configuration of the Access Point parameters,
including the SSID and channel number.
Basic
Interface
Security
Wireless MAC Address:
Network Name (SSID)
Access Control
New Channel
Current Channel
Data Encryption Mode:
Description
Enable or disable the
wireless interface.
The MAC address of the
wireless card installed is
displayed
Set the Network Name
(also known as SSID) of
this network.
Select a particular
channel on which to
operate.
The data encryption
mode currently used is
displayed
Status - Telephony - Router - Wireless
Enabled
00:19:df:80:00:68
ACG Welcome
5
5
wpa2
Apply Cancel
Value List or Range
Enabled, Disabled
Up to 32-character
string containing ASCII
characters with codes
between 0x20 and 0x7e
1-11
Web Configuration
Administration
eMTA-Settings
Default
Enabled
THOMSON-ACG-XXXX
as preconfigured by the
factory
11
WPA-PSK
(TKIP)
27