Door Reversal Directions; Description Of The Appliance - AEG Electrolux ER 6422 T Instruction Booklet

Door reversal directions

Before carring out the operations described
below, pull out the mains plug from the wall
socket.
To carry out this reversal go through the
following steps:
1. gently lay the appliance on its back with the
top held away from the floor by 5-8 cm (2-3
inces) of packing.
2. Remove the bottom door hinge (5).
3. Remove the door (4) by opening it and
pulling it gently downwards to remove it from
the top hinge pin (2).
4. Unscrew the top hinge pin (2) from the top
hinge (1) and replace it in the opposite hole on
the left hand side.
5. Unscrew the foot at the base (6) of the
appliance and refit it on the opposite side.
6. Refit the door and the bottom hinge to the left
hand side
7. Remove the door handle (3) and fit it on the
opposite side after having pierced the plastic
plugs with a punch. Cover the holes left open
with the plugs contained in the documentation
pack.

DESCRIPTION OF THE APPLIANCE

i
A - Dairy compartment
B - Can storage shelf with egg tray
C - Bottle storage shelf
D - Salad drawer
E - Glass shelf
6
When the bottom hinge is screwed in, a
certain amount of force is exerted on the
screws.
It is therefore advisable to lubricate the
screw tips before starting this operation.
Attention
After completion of the door reversal operation,
verify that the door gasket is sealing onto the
cabinet.
F - Storage shelve
G - Conveyor
H - Storing frozen food and making ice cubes
I - Thermostat control
Fig. 3