Appendix D. Set Up Usb-Pc Connection - iOptron SmartStar Cube 8800G Instruction Manual

Appendix D. Set Up USB-PC Connection

Before a computer being used to control the mount or update the firmware, a connection
between PC and 8402G Hand Controller has to be established. (If you have a 8402 HC, refer to
www.iOptron.com for more inforation).
For an 8402G Hand Controller, the initial LCD screen shows following when it is turned
on:
1. Install PL-2303 (usb2com) driver
Download USB to COM driver for 8402G hand controller from iOptron website and double click
on the compressed file:
Double click on it, and you will see:
GoToNova
8402G V071022W
www.iOptron.com
40
®