Set Telescope Coord; Park Scope - iOptron SmartStar Cube 8800G Instruction Manual

To setup/modify a Watch List, press MENU, use ▲ or ▼ button move the cursor to
"Watch List" and press ENTER. A following screen will show:
Add a watch object
Delete one data
Delete all
Browse the list
Select "Add a watch object" and press ENTER. Browse the celestial object list and select
the one you want to watch by press ENTER. Follow the screen prompt to confirm the selection.
After you are done, press BACK to back to Watch List menu.
You also can delete one or all objects in your watching list. After the watch list is set, it
can be observed through "Select and Slew" operation, either watching them manually or
automatically using Watch List Auto.

5.10. Set Telescope Coord.

Set the current Altitude and Azimuth of your telescope.

5.11. Park Scope

Park your telescope. Return the telescope to its initial position, i.e.,its altitude is 90º0.0'
and azimuth is 180º0.0'.
27