Changing the time and date
While the recorder is during stop
mode, press and hold the STOP (4)
button to display the [Time & Date]
and [Remain]. If the current time and
date is not correct, set it using the
1
procedure below.
1
While the recorder is during
stop mode, press and hold the
OK `/MENU button.
• The menu will appear on the display
(☞ P.47).
2
Press the + or − button to select
[Device Menu] tab.
• You can change the menu display by
moving the settings tab cursor.
EN
18
Setting time and date [Time & Date]
STOP (4 ) button
+−
button
9 0 button
OK `/MENU
button
Press the OK `/MENU or 9
3
button to move the cursor to the
item to set.
• [Device Menu] will appear on the
display.
4
Press the + or − button to select
[Time & Date].
Press the OK `/MENU or 9
5
button.
• [Time & Date] will appear on the
display.
• The "Hour" will flash on the display,
indicating the start of the Time and
Date setup process.
The following steps are the same as
Step 1 through Step 3 of "Setting time
and date [Time & Date]" (☞ P.17).
6
Press the STOP (4) button to close
the menu screen.