Or Other Digital Equipment - Sanyo DP42746 Owner's Manual

USING COMPONENT JACKS TO CONNECT A DVD PLAYER

OR OTHER DIGITAL EQUIPMENT

The Component Video jacks will accept HDTV, EDTV, or
SDTV video content.
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.) Follow these steps
to easily connect your STB or DVD Player to this DTV:
1
Connect DVD Player or similar digital equipment's
Component Video Out to the DTV's Video VIDEO3
jacks.
2
Connect DVD Player or similar digital equipment's
Audio Out to the DTV's VIDEO3 Audio jacks.
3
Press POWER to turn on the DTV, then turn on
external equipment.
4
Press INPUT to select Video 3 to view the DVD
program.
What you will need
for connections:
Component Video Cable – 1
Audio Cable – 1
SIGNAL CONVERSION CHART
INPUT SIGNAL OUTPUT SIGNAL
(From external equipment) (Display)
480i
480p
1080i
I
VIDEO2 and VIDEO3 jacks have identical functions. Com-
patible video devices can be connected to either set of
jacks.
I
Press the INPUT key after connecting the cables, to select
the Video 2 or Video 3 input signal. There is NO need to tune
to a blank channel.
720p
720p
720p
DTV BACK
I
" No Signal" will appear randomly on the screen when no
signal is detected at the VIDEO2 or VIDEO3 inputs.
Need help?
Visit our Web site at
1
DVD PLAYER
(or similar digital
device such as a
Digital Satellite
Receiver.)
2
COMPONENT JACKS
REMOTE CONTROL
4
www.sanyoctv.com
1-800-877-5032
or Call
1
2
3
13