Analog Antenna Signal Selection (Optional); Channel Scan Memory - Sanyo DP42746 Owner's Manual

ANALOG ANTENNA SIGNAL
(OPTIONAL)
Use this feature to switch between analog off-air
channels and analog cable channels.
1
Press the TUNER key to select analog channels.
2
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight (green) the
3
Analog Antenna Signal . Press ENTER.
Use the CURSOR LM keys to choose Cable or
4
VHF/ UHF . Press ENTER.
5
Press the EXIT key to return to normal TV viewing.

CHANNEL SCAN MEMORY

Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH L (up)
CH M (down) keys. This list can be customized by delet-
ing and/or adding channels.
1
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight (green)
2
Channel Scan Memory . Press ENTER.
20
Need help?
Visit our Web site at
www.sanyoctv.com
1-800-877-5032
or Call
To delete channels from the Channel Scan Memory
Use the CHANNEL (CH LM) keys or numerical
3
0 ~ 9 keys to select desired channel. HINT: Press the
TUNER key to switch between Digital and Analog
Channel Scan memories.
4
Press the ENTER key to delete the channel. The
display will change to "deleted. "
NOTES
"Delete?" will ap-
pear below the
channel number if
the selected chan-
nel is already in
the Channel Scan
Memory.
Use the number
keys to tune to
active channels not
in the Channel
Scan Memory list.
To Add a channel to the Channel Scan Memory
3
Use the numerical 0 ~ 9 keys to select the desired
channel number. "Add?" will appear below the
channel number.
4
Press the ENTER key to add the channel. The display
will change to " Added. "
When you have fin-
ished adding and/or
deleting channels,
press the EXIT key
to return to normal
TV viewing.
I
When a digital channel is deleted, all of that channel's sub-
channels are deleted as well.
I
Only previously deleted digital channels can be added back
to the Channel Scan Memory.
I
If one digital sub-channel is added back to the Channel Scan
Memory all of that channel's sub-channels will be added back.
I
If the last remaining digital channel is deleted, the entire previ-
ous Channel Scan Memory list will be restored automatically.
I
If the last remaining analog channel is deleted (cable or off-air
channel), ALL analog channels (cable or off-air) will be
restored automatically, regardless of the previous Analog
Channel Scan Memory list.