TouchPad LED board
NOTE:
The security cable lock is included with the base enclosure, spare part number 637187-001.
TouchPad LED board
Before removing the TouchPad LED board, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the TouchPad LED board:
1.
Position the computer right-side up.
2.
Release the zero insertion force (ZIF) connector (1), and disconnect the LED ZIF cable (2) from
the system board.
3.
Remove the LED board (3).
Reverse this procedure to install the TouchPad LED board.
ENWW
Battery on page
44)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page
53)
Top cover on page
56)
45)
46)
48)
Component replacement procedures
647622-001
61