HP Pavilion G6 Maintenance And Service Manual page 85

4. Remove the heat sink assembly (3) by lifting it straight up.
NOTE:
5. Position the system board right-side up, with the front toward you.
6. Disconnect the fan cable from the system board (1).
7. Remove the three Phillips 3.0×2.0 screws (2) that secure the heat sink assembly to the system
board.
NOTE:
assembly and system board components, it might be necessary to move the heat sink assembly
from side to side to detach the assembly.
8. Follow the sequence embossed on the heat sink to loosen the three Phillips 10.0×2.0 captive
screws (3) that secure the heat sink assembly to the system board.
ENWW
Steps 6 through 10 apply only to computer models equipped with AMD processors.
Due to the adhesive quality of the thermal material located between the heat sink
Component replacement procedures 77