Weber SP 200 NG Owner's Manual page 20

Step 19
Complete accessory installation
You will need: work table, accessory rack, warming rack,
thermometer, three tubing plugs and a hammer.
Set the work tables onto the left and right side rails.
Figure 25 (a).
Set the accessory rack in place between the two frame
connectors. Figure 25 (b).
Set the warming rack into the slots at the rear of the
cooking box. Figure 25 (c).
Insert the thermometer into its holder. Figure 25 (d).
Insert tubing plugs into the ends of the frame. To fully seat
the plugs, you may have to tap them lightly with a
hammer. Figure 25 (e).
(c)
(d)
(a)
(e)
(b)
Figure 25
Caution: To keep the barbecue stationary, the tabs
on the locking casters should be in the down
position.
20