Weber Skyline 3200 LP Owner's Manual page 29

d) Unlatch the Spider Stopper Guards and remove.
Figure 11.
e) Remove the manifold bracket and unscrew the two
wing nuts that hold the manifold to the cooking box.
Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 12.
f) Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 13.
Guide screw
Figure 11
View from behind
cooking box
Wing nuts
Figure 12
Figure 13
g) Lift and twist the burner assembly slightly, to separate
the crossover tube from the burners. Figure 14.
Remove the burners from the cooking box.
Crossover tube
h) To reinstall burners, reverse steps c) through g).
CAUTION: The burner openings must be
positioned properly over the valve orifices. Figure 15a.
Check proper assembly before fastening manifold in
place. Figure 15b.
(a)
Burner
(b)
29
Figure 14
Valve
Figure 15