Table of Contents
Advertisement
LOCAL CODES
UNPACKING
PRODUCT
FEATURES
101968
Install and use fireplace with care. Follow all local codes. In the absence of local
codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also
known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
National Fire Protection Association, Inc.
1. Remove trim kit and cartons containing logs from carton. Place the carton
containing the fireplace unit on its back. Hold fireplace unit and pull the carton
and pallet away.
2. Remove protective packaging applied to logs, log base assembly, and fireplace.
You may not want to remove protective plastic on front of fireplace until after
installing. This will protect fireplace from dust, debris, and damage during
installation.
3. Check all items for any shipping damage. If damaged, promptly inform dealer
where you bought fireplace.
Operation
This vent-free fireplace is clean burning. It requires no outside venting. There is no heat
loss out a vent or up a chimney. Heat is generated by both realistic flames and glowing
embers. The fireplace requires no electricity making it ideal for emergency back-up
heat.
Safety Device
This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS).
The ODS/pilot is a required feature for vent-free room heaters. The ODS system
shuts off the fireplace if there is not enough fresh air.
Piezo Ignition System
This fireplace has a piezo ignitor. This system requires no matches, batteries, or
other sources to light fireplace.
Manual Control
This fireplace has a manual control valve which allows the user to choose the heat
setting that best suits his needs. The low, medium, or high setting may be selected
by simply turning the control knob.
1430 Broadway
New York, NY 10018
Batterymarch Park
Quincy, MA 02269
5
Advertisement
Table of Contents
