Table of Contents
Advertisement
INSTALLING
Continued
20
INSTALLING LOGS
Do not add extra logs or ornaments such as pine
cones, vermiculite, or rock wool. Using these added
items can cause sooting.
Do not add lava rock around base. Rock and debris
could fall into the control area of fireplace.
Each log is marked with a number. These numbers will help you identify the log
when installing. It is very important to install these logs exactly as instructed. Do
not modify logs. Only use logs supplied with fireplace.
1. Slide rear log (#1) into place behind rear burner (see Figure 21).
2. Slide front log (#2) into place behind front burner. Make sure tabs at bottom of
log are behind front burner (see Figure 22).
Tab
WARNING
WARNING ICON
G 001
Figure 21 - Installing Rear Log
Figure 22 - Installing Front Log
Rear Log (#1)
Front Log (#2)
101968
Advertisement
Table of Contents
