Replacing A Front Turn Signal Light Bulb - Yamaha CYGNUS.X XC125 Owner's Manual

fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the panel.
8. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a front turn signal
light bulb
CAUTION:
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the center-
stand.
2. Remove panel A. (See page 6-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
1
ZAUM00**
1. Turn signal light bulb
2. Socket
6-26
EAUT1891 5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with the
ECA10670
bulb) by turning it clockwise.
7. Install the panel.
2
2
3
4
5
6
7
8
9