Yamaha CYGNUS.X XC125 Owner's Manual page 20

Hide thumbs Also See for CYGNUS.X XC125:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
G
a tripmeter (which shows the dis-
tance traveled since it was last set
to zero)
G
an oil change tripmeter (which
1
shows the distance traveled since
the last engine oil change)
G
an oil change indicator (which
2
flashes when the engine oil should
be changed)
3
G
a clock
G
a fuel meter
4
NOTE:
G
When the key is turned to "ON", all
segments of the display come on
5
for a few seconds. During this
time, the multi-function display is
6
performing a self-test.
G
Be sure to turn the key to "ON" be-
7
fore using the "SELECT" and "RE-
SET" buttons.
8
Odometer, tripmeter and oil change
tripmeter modes
9
Pushing the "SELECT" button switches
the display among the odometer mode
"ODO", the tripmeter mode "TRIP" and
the oil change tripmeter "OIL CHANGE
TRIP" in the following order:
ODO → TRIP → OIL CHANGE TRIP
→ ODO
Odometer
NOTE:
If the odometer indicates "-----", have a
Yamaha dealer check the multi-func-
tion display, as it may be faulty.
Tripmeter
To reset the tripmeter, select it by push-
ing the "SELECT" button until "TRIP" is
displayed, and then push the "RESET"
button at least 1 second.
NOTE:
If the tripmeter indicates "-----", have a
Yamaha dealer check the multi-func-
tion display, as it may be faulty.
Oil change tripmeter
To reset the oil change tripmeter, select
it by pushing the "SELECT" button until
"OIL CHANGE TRIP" is displayed, and
then push the "RESET" button at least
3 seconds. After resetting the oil
change tripmeter, "ODO" will be dis-
played.
3-4
NOTE:
If the "SELECT" button is pushed again
or the "SELECT" button hasn't been
pushed within 10 seconds, the oil
change tripmeter will keep counting
and "ODO" will be displayed.
Oil change indicator
Oil change indicator "
This indicator flashes at the initial 1000
km (600 mi), then at every 3000 km
(1800 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the
oil change tripmeter.
If the engine oil is changed before the
oil change indicator flashes (i.e. before
the periodic oil change interval has
been reached), the oil change tripmeter
must be reset after the oil change for
the next periodic oil change to be indi-
cated at the correct time.
NOTE:
G
If the oil change tripmeter is reset
before the initial 1000 km (600 mi),
the next periodic oil change inter-
"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cygnus xCygnus xc125

Table of Contents