PERIODIC MAINTENANCE AND ADJUSTMENT
Rear turn signal light bulb
If a rear turn signal light does not come
on, have a Yamaha dealer check the
1
electrical circuit or replace the bulb.
2
3
4
5
6
7
8
9
EAUT1330
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1
1. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
EAU24313
1. License plate light unit
2. License plate light bulb socket
6-34
1
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
2