Seat
To open the seat
1. Place the scooter on the center-
stand.
2. Insert the key into the main switch,
and then turn it counterclockwise
to "OPEN".
1
1. Open.
TIP
Do not push inward when turning the
key.
3. Fold the seat up.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13932
To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attended.
TIP
Make sure that the seat is properly se-
cured before riding.
Adjusting the rider backrest
The rider backrest can be adjusted to
the three different positions shown.
1. Rider backrest
Adjust the backrest as follows.
3-20
1
1. Open the seat. (See page 3-20.)
2. Remove the backrest bolts.
EAU14270
2
3
4
5
6
7
8
9