Onramp Gateway - Toshiba GA-1201 Quick Start Manual

5 APPENDIX

Onramp gateway

When an error has occurred in the onramp gateway function, check the setting by referring to
the list below.
No
1 Are servers for sending an
InternetFax/Email set cor-
rectly?
2 Is the IP address of this
equipment correctly set?
3 Can you utilize the TopAc-
cess?
4 Is the setting for SMTP
transmission of an Internet-
Fax/Email enabled?
5 Are settings for sending an
InternetFax/Email enabled?
6 Is a setting for the Fax func-
tions enabled?
7 Is a setting for the onramp
gateway functions enabled?
8 Can you send a Fax docu-
ment received from a G3
facsimile as an InternetFax/
Email?
34 Troubleshooting
Check Item Yes
Next Step
Next Step
Next Step
Next Step
Next Step
Next Step
Next Step
End
No Countermeasure
Refer to an appropriate manual
and set the DNS server and
SMTP server correctly.
If necessary, refer to the "Setting
up DNS Server and Mail Server"
in the Network Administration
Guide for Scanning Functions.
Refer to the Setup Guide for
Printing Functions and set the
TCP/IP correctly.
Refer to the Setup Guide for
Printing Functions and set the
HTTP correctly.
Refer to the Setup Guide for
Scanning Functions and set the
SMTP client correctly.
Refer to the Setup Guide for
Scanning Functions and per-
form a correct InternetFax setting.
Refer to the Setup Guide for
Printing Functions or the Oper-
ator's Manual for Facsimile
Function and perform a correct
Fax setting.
Refer to the Setup Guide for
Scanning Functions or the
Operator's Manual for Facsim-
ile Function and set the mail-
boxes and the Email address of
the destination correctly.
An error code is printed in the
Transmission/Reception Journal.
Refer to the "Error code list" in the
Network Administration Guide
for Scanning Functions.