Setup Flow For Onramp Gateway - Toshiba e-STUDIO 2500c Quick Start Manual

Setup Flow for Onramp Gateway

This equipment can convert received faxes into E-mails and forward them to other Internet Fax
devices or client computers using Onramp Gateway transmission.
The Onramp Gateway feature is available only when the optional Fax unit is installed.
This equipment can create the ITU-T relay mailbox in which E-mail addresses are registered as
end stations to achieve the Onramp Gateway transmission. Any ITU-T compatible facsimile can
send a fax to the ITU-T relay mailbox. This equipment then forwards received faxes to the E-
mail addresses registered in the ITU-T relay mailbox.
To use this equipment as a Hub Station for the Onramp Gateway transmission, the Relay Box in
which E-mail addresses are registered must be set up. This equipment, as the distributor, can
send an E-mail of any faxes received from any ITU-T compatible facsimile device.
ITU-T compatible
The Internet Fax device receives the document
from the Internet as an Internet Fax document.
The client computer receives the document
from the Internet as an email document.
Setup Flow
Connect this equipment
Onramp Gateway
G3 Facsimile
Internet
SMTP Server
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Sending a fax to the Relay Box of
the equipment through the
Public Switched Telephone network
Send a document as
Internet Fax to the Internet
via SMTP server
Internet Fax Device
Client Computers
Description/Reference
SETUP FLOW FOR FAX FEATURES
ITU-T
Relay Box
Email addresses
are assigned
as destinations
in the Relay Box
73