Basic Phone Features; Adjusting The Display Contrast - Cisco 7960 User Manual

Chapter 2

Basic Phone Features

NOTE: This chapter may cover more than one version of Cisco 7960 phone
(SCCP or MGCP). Although the chapter applies to all types, some information
may apply only to a certain phone configuration. The user is alerted to these
differences by an icon which is shown at left. The icon appears in the left
margin next to where the information differs. For how to identify your phone
configuration, see "Identifying Your 7960 Telephone Type" on page 4.

Adjusting the Display Contrast

Depending on your ambient lighting and viewing angle, you may need to adjust the
display contrast to achieve optimum visibility of your LCD display. To adjust the
display contrast, follow these steps:
1. Press the settings button.
2. Select the Contrast option.
a. On the 7960 MGCP and 7960 SCCP without an expansion module, use
b. On the 7960 SCCP with an expansion module, do one of the following:
NOTE: If you press a number key in step two, go to step four.
3. Press the Select soft key.
4. Press and release the Up and Down soft keys to reach the desired contrast
level.
NOTE: On the 7960 SCCP, the VOLUME up and down arrows may also be
used.
5. Press the Ok soft key to approve the changes.
6. Return to the standard call screen.
•
•
Cisco 7960/7940 Telephone User Guide
621-00000116
the up and down arrow scroll keys to highlight Contrast, or press 1 on
your keypad.
•
Use the up and down arrow scroll keys to highlight Base Phone, or
press 1 on your keypad.
•
Use the up and down arrow scroll keys to highlight Expansion
Module(s), or press 2 on your keypad.
On the 7960 MGCP, press the Back soft key.
On the 7960 SCCP, press the Exit soft key.
Basic Phone Features 7