Table of Contents
Advertisement
Chapter 3 Connection Status and System Info
Table 3 System Info Screen (continued)
LABEL
Mode
IP Address
LAN Information
IP Address
IP Subnet Mask
DHCP Server
LTE Status
Status
Signal Strength
Service Provider
Frequency Band
Connection Uptime
ODU F/W Version
Module F/W Version
IMEI
IMSI
Interface Status
Interface
Status
Rate
System Status
System Up Time
Current Date/Time
System Resource
28
DESCRIPTION
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the LTE Device in the WAN.
This field displays the current IP address of the LTE Device in the LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the LTE Device is providing to the LAN.
Choices are:
Server - The LTE Device is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
None - The LTE Device is not providing any DHCP services to the LAN.
This displays 4G LTE if there is an LTE connection, otherwise, it displays N/A.
This displays the strength of the LTE connection that the LTE Device has with the
base station which is also known as eNodeB or eNB.
This displays the service provider's name of the connected LTE network.
This displays LTE if there is an LTE connection.
This displays how long the LTE connection has been available since it was last
established successfully.
This displays the firmware version of the outdoor unit.
This displays the firmware version of LTE module.
This displays the LTE Device's International Mobile Equipment Identity number
(IMEI). An IMEI is a unique ID used to identify a mobile device.
This displays the International Mobile Subscriber Identity (IMSI) of the SIM card
inserted in the outdoor unit. An IMSI is a unique ID used to identify a mobile
subscriber in a mobile network.
This column displays each interface the LTE Device has.
This field indicates whether or not the LTE Device is using the interface.
For the LTE WAN interface, this field displays Up when the LTE Device is connected
to an LTE network and Down when the LTE Device does not have an LTE
connection.
For the LAN interface, this field displays Up when the LTE Device is using the
interface and Down when the LTE Device is not using the interface.
For the LTE WAN interface, this displays 4G LTE if there is an LTE connection.
For the LAN interface, this displays the port speed and duplex setting.
This field displays how long the LTE Device has been running since it last started
up. The LTE Device starts up when you plug it in, when you restart it
(Maintenance > Reboot), or when you reset it (see
This field displays the current date and time in the LTE Device. You can change this
in Maintenance > Time Setting.
Section 1.6 on page
15).
LTE6100 User's Guide
Advertisement
Table of Contents
