ZyXEL Communications LTE6100 User Manual page 53

Click Network Setting > QoS > Class Setup to open the following screen.
Figure 27 Network Setting > QoS > Class Setup
The following table describes the labels in this screen.
Table 18 Network Setting > QoS > Class Setup
LABEL
Add new
Classifier
Order
Status
Class Name
Classification
Criteria
Forward to
DSCP Mark
To Queue
Modify
LTE6100 User's Guide
DESCRIPTION
Click this to create a new classifier.
This field displays the order number of the classifier.
This indicates whether the classifier is active or not.
A yellow bulb signifies that this classifier is active. A gray bulb signifies that this classifier is
not active.
This is the name of the classifier.
This shows criteria specified in this classifier, for example the interface from which traffic of
this class should come and the source MAC address of traffic that matches this classifier.
This is the interface through which traffic that matches this classifier is forwarded out.
This is the DSCP number added to traffic of this classifier.
This is the name of the queue in which traffic of this classifier is put.
Click the Edit icon to edit the classifier.
Click the Delete icon to delete an existing classifier. Note that subsequent rules move up by
one when you take this action.
Chapter 7 Quality of Service (QoS)
53