Camera Setup - Honeywell 10X User Manual

OSD Menu

Camera Setup

ZOOM CAMERA SETUP
------------------------
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
SHARPNESS
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
34
The Zoom Camera Setup menu sets the general functions of the zoom
camera module.
SEMIAUTO
ON
Focus Mode
OFF
16
Digital Zoom
Image Flip
Sharpness
[AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
SEMIAUTO mode
This mode automatically exchanges focus modes
between Manual Focus mode and Auto Focus mode
by operation. Manual Focus mode activates in preset
operation and Auto Focus mode activates during jog
operation. In Manual Focus mode, focus data is
memorized for each Preset in advance. When the
camera arrives at a Preset, the camera remembers
the focus data for that Preset, shortening the focus
time. Focus mode automatically changes to Auto
Focus mode when jog operation starts.
[ON/OFF]
Enables or disables the Digital Zoom function. When
this is set to OFF, the optical zoom function runs but
stops at the end of optical zoom magnification.
[ON/OFF]
Enables or disables Image Flip function. When the
camera is installed as Desktop type, set to ON to get
proper images.
[0~31]
Sets image sharpness to enhance pictures.