Audio Settings; Camera Setup - Honeywell HD4DIP Reference Manual

IP Camera Web-Client
Setting Options
Picture Quality Best, Better,
Good
Target Bit Rate 400–5000 kbps
(kbps)
GOP (No. of 1–100
Frames)

Audio Settings

Camera Setup

52
Table 4-3 Compression Settings (cont'd)
Description
When Quality is selected as the Priority, select the Picture Quality as Good
(lowest visual quality), Better, or Best (highest visual quality).
Enter the Target Bit Rate in kbps (kilobits per second) which represents the
amount of data processed per second.
Select the GOP (Group of pictures) number from 1 to 100.
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry standard line level audio input
and output to the back of your camera. See
information.
Audio configuration for your network camera is straightforward. To listen to or capture audio
from the camera, enable the Camera to Client (PC) check box (
to audio from the client (PC), enable the Client (PC) to Camera check box.
The Camera Setup view provides access to the settings used to configure the camera
functionality. The following section explains Auto Exposure and White Balance setup.
Note You must click Apply after you make changes to any settings to save those
changes. Settings will not be saved unless you click Apply.
Connecting Alarms on page 26 for more
). To listen