Epson PowerLite Home Cinema 705HD Quick Setup Manual page 81

The image is too light or dark, or colors are incorrect.
■ Press the
Color Mode
option in the Image menu. See page 37 for details on the available
options.
If you're displaying video, adjust the
■
settings on the Image menu. You can also try
Color Mode
adjusting the
Color Saturation
on the Image menu.
Try adjusting the
■
Brightness
menu.
Try adjusting the
■
Power Consumption
Check your computer display settings to correct the color balance.
■
■ The projector's lamp may need to be replaced. See page 62 for
instructions.
■ Make sure the correct input signal is selected in the Signal menu
(see page 50).
Make sure that all cables are connected to the proper ports and
■
connected securely.
Nothing happens when you connect a computer to the USB
Type B port.
This port is for service only. You can't use it for computer display.
There is no sound, or the sound is not loud enough.
Use the buttons to adjust the volume (see page 41), or
■ Volume
adjust the
Volume
Make sure A/V Mute is not enabled. (Press the
■
to disable it.)
If your presentation includes computer audio, make sure the
■
volume control on your computer is not turned all the way down
or muted. In Windows, you may be able to check this by clicking
the volume control in your Windows system tray (lower right
button or select a different
Color Adjustment
,
Color Temp
and
Contrast
setting (see page 51).
setting in the Settings menu.
Color Mode
and
, and settings
Tint
settings on the Image
button
A/V Mute
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
Solving Problems
79