Epson PowerLite Home Cinema 705HD Quick Setup Manual page 77

If you're using a PC notebook:
■ Hold down the
Fn
key that lets you display on an external monitor. It may have an
icon such as
seconds for the projector to sync up after pressing it. Check your
notebook's manual or online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
If you connect the notebook while the projector or computer are
already turned on, the function
computer's image signal to external output may not work. Turn
the computer and the projector off and then back on again.
Depending on your computer's video card, you might need to use
■
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using Mac OS X:
1. Open
System Preferences
2. Click or
Display Displays
3. Click
Detect Displays
4. Select
VGA Display
5. Click
Arrangement
6. Select
Mirror Displays
The message
Not Supported
Make sure the correct input signal is selected in the Signal menu
■
(see page 49).
Make sure your computer's resolution and frequency or refresh
■
rate is supported by the projector (see page 86). If necessary,
change your computer's settings.
key on the keyboard and press the function
, or it may be labelled
CRT/LCD
key lets you toggle between the LCD
key that changes the
Fn
.
.
.
or .
Color LCD
or .
Arrange
.
is displayed.
. Allow a few
Solving Problems
75