Displays; Audio - Polycom SoundStation IP 7000 Setup Manual

Displays

Symptom
There is no display.
The display is incorrect.
The display has bad contrast.
The display is flickering.

Audio

Symptom
The speaker has no audible
sound.
Problem
Power is not correctly applied to
the phone.
The contrast needs adjustment.
Certain types of older fluorescent
lighting cause the display to
appear to flicker.
Problem
Speaker volume is low.
Troubleshooting Your Phone Setup
Corrective Action
Verify that power is correctly applied to the
phone:
Check that the display is illuminated.
•
Ensure the network cable is inserted
•
properly on the underside of the
phone. (Try unplugging and
re-inserting the cable.)
If your phone uses in-line power, have
•
your system administrator check that
the switch is supplying power to the
phone.
Adjust the screen contrast. (See the User
Guide for the Polycom SoundStation IP
7000 Phone, available at
www.polycom.com/voicedocumentation.)
Try the following:
Move the phone away from the lights.
•
Replace the lights.
•
Corrective Action
Adjust the speaker volume. During a call,
or
press either .
2 - 7