Warranty; Accessories And Spare Parts En - Kärcher HDS 5/12 C Instructions Manual

Hide thumbs Also See for HDS 5/12 C:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
Note: By dismantling the high pressure
hose from the high pressure connection the
venting process is accelerated.
 If detergent tank is empty, refill.
 Check connections and conduits.
Sieve in the water connection is dirty
 Clean sieve.
 Clean the fine filter; replace it, if neces-
sary.
Amount of water supply is too low.
 Check water supply level (refer to tech-
nical data).
Device leaks, water drips from the
bottom of the device
Pump leaky
Note: 3 drops/minute are allowed.
 With stronger leak, have device
checked by customer service.
Device turns on and off while hand
spray gun is closed
Leak in the high pressure system
 Check high pressure system and con-
nections for tightness.
Device is not sucking in detergent
Nozzle is set to "High pressure"
 Set nozzle to "CHEM".
Filter in the detergent suck hose dirty
 Clean filter.
Backflow valve stuck
 Remove the detergent hose and loosen
the backflow valve using a blunt object.
Burner does not start
Fuel tank empty.
 Refill fuel.
Water shortage
 Check water supply, check connec-
tions.
 Clean sieve in the water shortage safe
guard.
Fuel filter dirty
 Change fuel filter.
No ignition spark
 If device is in use and no ignition spark
can be seen through the viewing glas,
have device checked by customer ser-
vice.
Set temperature is not achieved
while using hot water
Sooty heating spiral
 Have device de-sooted by customer
service.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Accessories and Spare Parts
Note: When connecting the appliance to a
chimney or if the device cannot be ac-
cessed visually, we recommend the instal-
lation of a flame monitor (option).
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
– 9
EN

Warranty

25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents