Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket or screws.
Description
1-TB, 5400-rpm, 2.5-inch
500-GB, 7200-rpm, 7-mm, SED
500-GB, 7200-rpm, 2.5-inch, SED
500-GB, 7200-rpm, 7-mm
500-GB, 5400-rpm, 7-mm
500-GB, 5400-rpm, 7-mm, FIPS
320-GB, 5400-rpm, 7-mm
320-GB, 5400-rpm, 7-mm
Hard Drive Hardware Kit (includes hard drive bracket and screws)
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
5.
Disconnect the battery.
Remove the hard drive:
1.
Turn the computer upside down on a flat surface.
Service cover on page
48).
Component replacement procedures
Spare part number
676521-001
703268-001
683801-001
703267-001
683802-001
730946-001
634862-001
645193-001
730793-001
51