Remove Everything And Reinstall Sled - HP EliteBook 840 G1 Service Manual

To restore the computer from the recovery disc, follow these steps:
1.
If possible, back up all personal files.
2.
Insert the HP Factory Image Restore DVD into the optical drive and restart the computer.
3.
As the computer is restarting, press
4. Select Optical Disk Drive from the Boot Options menu and press enter.
5. Press enter
6. At both of the System Recovery prompts, select Yes.

Remove everything and reinstall SLED

Sometimes you want to perform detailed reformatting of your computer, or you want to remove
personal information before you give away or recycle your computer. The process described in this
section provides a speedy, simple way to return the computer to its original state. This option removes
all personal data, applications, and settings from your computer, and reinstalls the Linux operating
system.
IMPORTANT:
back up any personal information you wish to retain.
You can initiate this option by using the
To use the f11
Press f11 while the computer boots.
– or –
Press and hold
Select System Recovery and follow the on-screen instructions.
to select Restore System from Media.
This option does not provide backups of your information. Before using this option,
key:
f11 as you press the power button.
f9 to open the Computer Setup boot option menu.
f11 key.
Remove everything and reinstall SLED
141