Cooling Fin/Cpu - Toshiba Tecra M2V Maintenance Manual

Personal computer

Hide thumbs Also See for Tecra M2V:

Table of Contents

4.19 Cooling fin/CPU

Removing the Cooling fin/CPU

To remove the Cooling fin/CPU, follow the steps below and refer to figures 4-37 to 4-39.

CAUTION: 1) The CPU can become very hot during operation. Be sure to let it cool

before starting repair work.

2) When you remove the CPU, wipe the grease off of the bottom of the fin

and top of the CPU. Apply new grease when installing.

1. Remove the following screws securing the CPU holder, in the reverse order of the

number marked on the holder.

2. Remove the CPU holder.

TECRA M2V Maintenance Manual (960-476)

Figure4-37 Removing the CPU holder

4 Replacement Procedures

Table of Contents