Sa_Write_Congestion (Id: 01801337); Sa_Write_Congestion (Id: 01801338); Trigger_Non_Ip_Packet (Id: 01802001); Rule_Not_Active (Id: 01802002) - D-Link DFL-260E Reference Manual

2.22.68. sa_write_congestion (ID:
01801337)
Parameters

2.22.68. sa_write_congestion (ID: 01801337)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.69. sa_write_congestion (ID: 01801338)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.70. trigger_non_ip_packet (ID: 01802001)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.71. rule_not_active (ID: 01802002)

remotepeer
INFORMATIONAL
Failed to write SA to Nitrox II due to congestion. <dir> SPI <spi>
There was not enough free buffers to write the SA to Nitrox II. Every
new packet on the SA will trigger a new try.
None
None.
1
dir
spi
WARNING
Failed to write SA to Nitrox II; the request timed out. <dir> SPI <spi>
A request to write an SA to Nitrox II timed out\r\n.
None
None.
1
dir
spi
WARNING
Trigger for non-IP packet of protocol <proto>. Dropping request for
policy
Trigger for non IP packet, dropping request.
dropping_request
None.
1
proto
269
Chapter 2. Log Message Reference