D-Link DFL-260E Reference Manual page 33

1.2. Context Parameters
IDP
Specifies the name and a description of the signature that triggered this event.
Dropped Fragments
Specifies detailed information about dropped fragments in a packet.
Rule Name
Specifies the name of the rule that was used when this event was triggered.
rule
Rule Information
Additional information about the rule that was used when this event was triggered. Certain
parameters may or may not be included, depending on the type of rule. For example, the name of an
authenticated user is only included if this rule contains network objects that has user authentication
information in them.
rule
[satsrcrule]
[satdestrule]
[srcusername]
[destusername]
User Authentication
Additional information about a user authentication event.
authrule
authagent
authevent
connection is closing or closed.
Note
For IDP log messages an additional log receiver, an SMTP log receiver, can be
configured. This information is only sent to log receives of that kind, and not included
in the Syslog format.
The name of the rule.
The name of the rule.
The name of the SAT source rule. Valid if the rule action is SAT.
The name of the SAT destination rule. Valid if the rule action is SAT.
The name of the authenticated user in the source network object. Valid if the
source network object has user authentication information.
The name of the authenticated user in the destination network object. Valid if the
destination network object has user authentication information.
The name of the user authentication rule.
The name of the user authentication agent.
The user authentication event that occurred. Possible values: login, logout,
33
Chapter 1. Introduction