Maximum_Allowed_Tunnels_Limit_Reached (Id: 01800900); Sas_Not_Killed_For_Remote_Peer (Id: 01800901); Sa_Write_Congestion (Id: 01801337) - D-Link NetDefend SOHO DFL-160 Reference Manual

Utm firewall
Hide thumbs Also See for NetDefend SOHO DFL-160:
Table of Contents

Advertisement

2.14.66. maximum_allowed_tunnels_limit_reached
(ID: 01800900)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.14.66. maximum_allowed_tunnels_limit_reached (ID:
01800900)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.14.67. SAs_not_killed_for_remote_peer (ID: 01800901)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.14.68. sa_write_congestion (ID: 01801337)

Default Severity
Log Message
Explanation
ERROR
IPsec interface disabled
IPsec interface disabled.
None
None.
1
ALERT
Negotiation aborted due to license restrictions. Reached maximum of
<allowed_tunnels> active IPsec tunnels
More tunnels and/or unique peers than the license allow are trying to
establish.
negotiation_aborted
None.
1
allowed_tunnels
CRITICAL
Failed to kill associated SA:s for <remotepeer> peer(s)
This happens if there is no tunnel established with the given peer.
None
None.
1
remotepeer
INFORMATIONAL
Failed to write SA to Nitrox II due to congestion. <dir> SPI <spi>
There was not enough free buffers to write the SA to Nitrox II. Every
new packet on the SA will trigger a new try.
200
Chapter 2. Log Message Reference

Advertisement

Table of Contents
loading

Table of Contents