Invalid_Stp_Frame (Id: 04400419); Relay_Mpls_Frame (Id: 04400420); Dropped_Mpls_Packet (Id: 04400421) - D-Link DFL-260E Reference Manual

2.47.10. invalid_stp_frame (ID:
04400419)
Recommended Action
Revision
Parameters

2.47.10. invalid_stp_frame (ID: 04400419)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.47.11. relay_mpls_frame (ID: 04400420)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.47.12. dropped_mpls_packet (ID: 04400421)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
None.
1
recvif
WARNING
Incomming STP frame from <recvif> dropped. Reason: <reason>
An incomming Spanning-Tree frame has been dropped since it is
either malformed or its type is unknown. Supported Spanning-Tree
versions are STP, RSTP, MSTP and PVST+.
drop
If the frame format is invalid, locate the unit which is sending the
malformed frame.
1
recvif
reason
INFORMATIONAL
Forwarding MPLS packet from <recvif>.
An incomming MPLS packet has been forwarded through the gateway.
[destif] indicates if it was forwarded to an ultimate destination or if it
was broadcasted to over all interfaces in the switch group.
allow
None.
1
recvif
destif
INFORMATIONAL
Dropping MPLS packet from <recvif>
An incomming MPLS packet has been dropped.
drop
None.
458
Chapter 2. Log Message Reference