L2Tpclient_Tunnel_Up (Id: 02800018); Malformed_Packet (Id: 02800019); Waiting_For_Ip_To_Listen_On (Id: 02800050) - D-Link DFL-260E Reference Manual

2.27.16. l2tpclient_tunnel_up (ID:
02800018)
Gateway Action
Recommended Action
Revision

2.27.16. l2tpclient_tunnel_up (ID: 02800018)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.27.17. malformed_packet (ID: 02800019)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.27.18. waiting_for_ip_to_listen_on (ID: 02800050)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
accounting_disabled
Make sure the RADIUS accounting configuration is correct.
1
NOTICE
L2TP tunnel to <remotegw> is up. Tunnel ID: <tunnelid>
L2TP tunnel negotiated successfully.
None
None.
1
tunnelid
iface
remotegw
WARNING
Malformed packet received from <remotegw> on tunnel <iface>. Error
code: <error_code>
A malformed packet was received by the L2TP interface.
None
None.
1
iface
remotegw
error_code
NOTICE
L2TP server <iface> cannot start until it has an IP address to listen on
The L2TP server cannot start until the L2TP interface has a proper IP
address to listen on.
None
Make sure that the IP address is configured correctly on the L2TP
server interface, or that the DHCP server can hand out a proper IP
335
Chapter 2. Log Message Reference