Cpu Configuration - Foxconn P35A Series User Manual

CPU Configuration

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Configure advanced CPU settings
Manufacturer:Intel
Intel(R) Core(TM)2 CPU
Frequency
FSB Speed
Cache L1
Cache L2
Ratio Status
Ration Actual Value:9
Super Clock Free
Intel(R) Speedstep(tm) Tech
CIE Support
CPU TM Function:
Execute Disable Bit
Core Multi-Processing
↑↓←→:Move Enter:Select
F7:Previous Values
!
Enhanced Intel SpeedStep ® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some
system requirements must be met, including CPU, chipset, motherboard, BIOS and
operation system. Please refer to Intel website for more information.
► Super Clock Free
This item is used for the Super Clock Free technology. It supports adjustable CPU Multiplier,
perform better FSB, more options for overclocking.
It is available only when the CPU is not the XE CPU and EIST is enabled.
► Intel ® SpeedStep (tm) tech.
This item is used specifically for the Enhanced Intel SpeedStep technology (EIST), the options
are :
[Enabled] : CPU speed is controlled by the operating system.
[Disabled] : Use default CPU speed.
► C1E Support
C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power
consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
► CPU Thermal Meter Function
For the processor with CPUID below 04F1H, when CPU is running up to a higher frequency,
enable Thermal Meter will automatically keep Front Side Bus to run at a limited speed, so to
protect your system.
When CPU frequency >=3.6GHz, maximum FSB is 800MHz
When CPU frequency >=2.8GHz, maximum FSB is 533MHz.
Disabling this feature may come out a high temperature system, and system would crash.
CPU Configuration
4300 @ 1.80GHz
:1.80GHz
:800MHz
:32 KB
:2048 KB
:Unlocked (Min:06, Max:09)
[Disabled] [Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
+/-/:Value F10:Save
F8:Fail-Safe Defaults
29
Help Item
It is available
only when the CPU
is not the XE CPU
and EIST is enabled
ESC:Exit F1:General Help
F9:Optimized Defaults